[wix-users] WiX burn bootstrapper update process launches new UIs

[Huy Doan]

I see that the error is not within your boostrapper itself but with the installation of the vcredist_x86_2010.exe. Try to install that pre-requisite alone to see what happen to it. If you are using Visual Studio 2015 and running the test on the same machine, it would have been the cause of the problem. I’m not totally sure about this. Try to create a VM and run the test on it.

From: Mayooran Macilamany [mailto:mayooran99 at gmail.com]
Sent: Tuesday, July 12, 2016 12:40 AM
To: Huy Doan <hdoan at vmware.com>; WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
Subject: Re: [wix-users] WiX burn bootstrapper update process launches new UIs

So I followed the same steps as shown in ProgressViewModel class in WiXBA project. But when there is an error occurring the pre-requisites, the progress percentage doesn't reach 100. It stops in the middle at 75 or 80. In the bundle I've set the vital element of the pre-requisite to no. Below are the errors that are reflecting in the progress percentage.

[75DC:81CC][2016-07-12T13:01:57]i301: Applying execute package: VC_2010_Redistributable, action: Install, path: C:\ProgramData\Package Cache\372D9C1670343D3FB252209BA210D4DC4D67D358\vcredist_x86_2010.exe, arguments: '"C:\ProgramData\Package Cache\372D9C1670343D3FB252209BA210D4DC4D67D358\vcredist_x86_2010.exe" /quiet /norestart'
[75DC:81CC][2016-07-12T13:02:00]e000: Error 0x800713ec: Process returned error: 0x13ec
[75DC:81CC][2016-07-12T13:02:00]e000: Error 0x800713ec: Failed to execute EXE package.
[7F90:83A4][2016-07-12T13:02:00]e000: Error 0x800713ec: Failed to configure per-machine EXE package.
[7F90:83A4][2016-07-12T13:02:00]i000: ExecutePackageComplete status is -2147019796
[7F90:83A4][2016-07-12T13:02:00]w350: Applied non-vital package: VC_2010_Redistributable, encountered error: 0x800713ec. Continuing...
[75DC:81CC][2016-07-12T13:02:00]i301: Applying execute package: VC_2013_Redistributable, action: Install, path: C:\ProgramData\Package Cache\DF7F0A73BFA077E483E51BFB97F5E2ECEEDFB6A3\vcredist_x86_2012.exe, arguments: '"C:\ProgramData\Package Cache\DF7F0A73BFA077E483E51BFB97F5E2ECEEDFB6A3\vcredist_x86_2012.exe" /q /norestart -burn.ancestors={47803a15-3be7-41e6-8a7a-02599b7afdae}'
[7F90:83A4][2016-07-12T13:02:02]i000: ExecutePackageComplete status is 0
[7F90:83A4][2016-07-12T13:02:02]i319: Applied execute package: VC_2013_Redistributable, result: 0x0, restart: None
[75DC:81CC][2016-07-12T13:02:02]i301: Applying execute package: Netfx45, action: Install, path: C:\ProgramData\Package Cache\5934DD101414BBC0B7F1EE2780D2FC8B9BEC5C4D\dotNet4.5Installer.exe, arguments: '"C:\ProgramData\Package Cache\5934DD101414BBC0B7F1EE2780D2FC8B9BEC5C4D\dotNet4.5Installer.exe" /q /norestart'
[75DC:81CC][2016-07-12T13:03:16]e000: Error 0x80070009: Process returned error: 0x9
[75DC:81CC][2016-07-12T13:03:16]e000: Error 0x80070009: Failed to execute EXE package.
[7F90:83A4][2016-07-12T13:03:16]e000: Error 0x80070009: Failed to configure per-machine EXE package.
[7F90:83A4][2016-07-12T13:03:16]i000: ExecutePackageComplete status is -2147024887

Please advice on how to handle this scenario.

On Mon, Jul 11, 2016 at 9:49 PM, Huy Doan <hdoan at vmware.com<mailto:hdoan at vmware.com>> wrote:
That sounds strange to me because I have never encountered such a problem with my progress bar.

How do you get the progress for the progress bar? I would strongly recommend you to take a look at the Wix source code (src\burn -> WixBA) and you will find the full detail in the ProgressViewModel.

This is the link the the github for your convenience
https://github.com/wixtoolset/wix3/blob/develop/src/Setup/WixBA/ProgressViewModel.cs<https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_wixtoolset_wix3_blob_develop_src_Setup_WixBA_ProgressViewModel.cs&d=CwMFaQ&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=dIns6fQ--MkFJxuBFYmMeQ&m=e9kAqRsyx7plE_POXikmoz26PSNEIhXqxM9KD5toMNE&s=y4uXPVLU58nI6xmSoPJC-ouqZbQ65sojyHFoA5VxG8I&e=>

-----Original Message-----
From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org<mailto:wix-users-bounces at lists.wixtoolset.org>] On Behalf Of Mayooran Macilamany
Sent: Sunday, July 10, 2016 5:57 PM
To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org<mailto:wix-users at lists.wixtoolset.org>>
Subject: [wix-users] WiX burn bootstrapper update process launches new UIs

I have created this bootstrapper application in which I have set the progress percentage to 100% and exit button text to "Close" when the ApplyComplete event is triggered. This works fine when installing and uninstalling. But when updating and repairing, this ApplyComplete method is triggered multiple times. This is because new installer UIs are launched during the process of updating and repairing. Probably because its uninstalling and installing? If so how can I stop this from happening? I want the progress bar to reach 100% only once. For this ApplyComplete method should be triggered only once. Any help would be much appreciated.

Thanks and regards,

Mayooran.
____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant https://urldefense.proofpoint.com/v2/url?u=http-3A__www.firegiant.com_&d=CwICAg&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=dIns6fQ--MkFJxuBFYmMeQ&m=7k_HORjB3IwaVonosE8g25OJNBj6jZKHfAhFMjFyq-g&s=jZPSyt3uBRACR1fbfLM9lnCigrJpXcxRKyw-nz-oBVE&e=