[wix-users] Need some help fixing this Burn script...

Mike Franchitti mfranchitti at redshift-tech.com
Wed Mar 20 10:28:15 PDT 2019 

Really appreciate your help with this Edwin!

I will look into the ExitCode elements you mentioned and see if I can get
CDM to go through as a success. I just verified that it did install
successfully on target machine despite returning exit code 0x1.

On Wed, Mar 20, 2019 at 1:23 PM Edwin Castro <egcastr at gmail.com> wrote:

> The SerialPortDriver package, installed with CDM21228_Setup.exe, is
> returning exit code 0x1 which is interpreted by the bundle as a failure.
>
> [1594:1F7C][2019-03-20T12:52:25]i301: Applying execute package:
> SerialPortDriver, action: Install, path: C:\ProgramData\Package
> Cache\C44678C7459798C800332273C74049CEA204A604\CDM21228_Setup.exe,
> arguments: '"C:\ProgramData\Package
> Cache\C44678C7459798C800332273C74049CEA204A604\CDM21228_Setup.exe"'
> [1594:1F7C][2019-03-20T12:52:32]e000: Error 0x80070001: Process returned
> error: 0x1
> [1594:1F7C][2019-03-20T12:52:32]e000: Error 0x80070001: Failed to execute
> EXE package.
> [2D28:35C0][2019-03-20T12:52:32]e000: Error 0x80070001: Failed to
> configure per-machine EXE package.
> [2D28:35C0][2019-03-20T12:52:32]i319: Applied execute package:
> SerialPortDriver, result: 0x80070001, restart: None
> [2D28:35C0][2019-03-20T12:52:32]e000: Error 0x80070001: Failed to execute
> EXE package.
>
> As a result, the bundle rolls back the other packages. The bundle will run
> the uninstall command to roll back packages.
>
> NOTE: The bundle expects the failing package to roll itself back!
>
> First, you see the Sparkwave package roll back:
>
> [2D28:35C0][2019-03-20T12:52:32]i301: Applying rollback package:
> Sparkwave, action: Uninstall, path: (null), arguments: '
> ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7"'
> [2D28:35C0][2019-03-20T12:52:35]i319: Applied rollback package: Sparkwave,
> result: 0x0, restart: None
>
> Followed by the Consensys package:
>
> [1594:1F7C][2019-03-20T12:52:35]i301: Applying rollback package:
> Consensys, action: Uninstall, path: C:\ProgramData\Package
> Cache\4F3679442D5925D31D0BDCD863D5E799EB848D2C\Setup.exe, arguments:
> '"C:\ProgramData\Package
> Cache\4F3679442D5925D31D0BDCD863D5E799EB848D2C\Setup.exe"'
> [2D28:35C0][2019-03-20T12:53:13]i319: Applied rollback package: Consensys,
> result: 0x0, restart: None
>
> Then the GazepointControl package which fails to uninstall as it returns
> exit code 0x2:
>
> [1594:1F7C][2019-03-20T12:53:13]i301: Applying rollback package:
> GazepointControl, action: Uninstall, path: C:\ProgramData\Package
> Cache\15368F3BCEDE2502575E7F5D620AC74A6BE4CBC3\Gazepoint_5.3.0.exe,
> arguments: '"C:\ProgramData\Package
> Cache\15368F3BCEDE2502575E7F5D620AC74A6BE4CBC3\Gazepoint_5.3.0.exe"'
> [1594:1F7C][2019-03-20T12:53:19]e000: Error 0x80070002: Process returned
> error: 0x2
> [1594:1F7C][2019-03-20T12:53:19]e000: Error 0x80070002: Failed to execute
> EXE package.
> [2D28:35C0][2019-03-20T12:53:19]e000: Error 0x80070002: Failed to
> configure per-machine EXE package.
> [2D28:35C0][2019-03-20T12:53:19]i319: Applied rollback package:
> GazepointControl, result: 0x80070002, restart: None
>
> NOTE: The arguments used to uninstall the ExePackages are identical to the
> install arguments! You'll want to set UninstallCommand on those ExePackages
> to tell the bundle how to correctly uninstall them.
>
> The bundle knows how to uninstall MsiPackages so you don't have to tell it
> how to do that.
>
> You'll still need to troubleshoot why CDM21228_Setup.exe is returning exit
> code 0x1. If that is a success exit code, then you'll want to add an
> ExitCode elements under your ExePackage element to tell the bundle to treat
> it as a success. You could add more ExitCode elements to handle other
> possible exit codes.
>
> http://wixtoolset.org/documentation/manual/v3/xsd/wix/exitcode.html
>
> I assume Gazepoint_5.3.0.exe returned exit code 0x2 during rollback
> because it was already installed but you'll want to check that as well.
>
> To summarize, your packages are running twice because the bundle thinks
> the last one failed and when it tried to uninstall the previous packages it
> ran the install command because it didn't have a proper uninstall command.
>
> --
> Edwin G. Castro
>
>
> On Wed, Mar 20, 2019 at 10:00 AM Mike Franchitti <
> mfranchitti at redshift-tech.com> wrote:
>
>> Here you go.
>>
>>
>> On Wed, Mar 20, 2019 at 11:56 AM Edwin Castro <egcastr at gmail.com> wrote:
>>
>>> Can you share logs?
>>>
>>> --
>>> Edwin G. Castro
>>>
>>>
>>> On Wed, Mar 20, 2019 at 8:15 AM Mike Franchitti <
>>> mfranchitti at redshift-tech.com> wrote:
>>>
>>>> Edwin,
>>>>
>>>> Thanks a lot - I am now using the DetectCondition & InstallCondition
>>>> properly.
>>>>
>>>> My script is still trying to execute installers in the chain multiple
>>>> times. To be specific - it asks me to install Gazepoint, Consensys, etc...
>>>> two times during a single run of the burn installer...
>>>>
>>>>
>>>>
>>>> On Wed, Mar 20, 2019 at 10:43 AM Edwin Castro <egcastr at gmail.com>
>>>> wrote:
>>>>
>>>>> Logs are very helpful in determining what the bundle is doing. Here
>>>>> are some general comments instead...
>>>>>
>>>>> I think you use DetectCondition to determine if a package is installed.
>>>>>
>>>>> I think you use InstallCondition to decide whether to install a
>>>>> package that is not installed.
>>>>>
>>>>> For example, I use DetectCondition to determine if an ExePackage is
>>>>> already installed *but* I use InstallCondition to install the 32-bit
>>>>> package on a 32-bit OS and the 64-bit package on a 64-bit OS.
>>>>>
>>>>> MsiPackage can already determine if an MSI is already is installed so
>>>>> you probably do not need the RegistrySearch for it. I use InstallCondition
>>>>> with MsiPackage to install the 32-bit package on a 32-bit OS and the
>>>>> 64-bit package on a 64-bit OS.
>>>>>
>>>>> --
>>>>> Edwin G. Castro
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Mar 20, 2019, 06:49 Mike Franchitti via wix-users <
>>>>> wix-users at lists.wixtoolset.org> wrote:
>>>>>
>>>>>> The following script is not working correctly, and I am not sure how
>>>>>> to
>>>>>> proceed - if someone could take a look and provide some feedback I'd
>>>>>> appreciate it...
>>>>>>
>>>>>> My target is to get this working on Windows 10.
>>>>>>
>>>>>> Here are the problems I've seen so far:
>>>>>>
>>>>>>    - The generated .exe tries to run some of the installers listed in
>>>>>> the
>>>>>>    chain multiple times.
>>>>>>    - The Sparkwave installer (which works on it's own) fails to run
>>>>>> if it's
>>>>>>    placed AFTER the CDM installer with errors related to verifying
>>>>>> it's hash.
>>>>>>    (If I place the Sparkwave installer BEFORE the CDM installer in
>>>>>> the chain
>>>>>>    it works correctly)...
>>>>>>    - The CDM installer appears to run all the way through, but upon
>>>>>> click
>>>>>>    the final "finish" button in that installer the Burn script fails
>>>>>>    with Error 0x80070001. I think this is related to it's attempt to
>>>>>> run the
>>>>>>    same installers multiple times...
>>>>>>
>>>>>> Here is my script:
>>>>>>
>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>> <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" xmlns:util="
>>>>>> http://schemas.microsoft.com/wix/UtilExtension">
>>>>>>   <Bundle Name="Bootstrap" Version="1.0.0.0" Manufacturer="Bootstrap"
>>>>>> UpgradeCode="537641ca-e876-4bcb-8d57-c6cdc8940c84">
>>>>>>     <BootstrapperApplicationRef
>>>>>> Id="WixStandardBootstrapperApplication.RtfLicense" />
>>>>>>
>>>>>>     <util:FileSearch
>>>>>>       Id="SearchForGazepoint"
>>>>>>       Path="[ProgramFilesFolder]Gazepoint\Gazepoint\bin\Gazepoint.exe"
>>>>>>       Variable="GazepointFound"
>>>>>>       Result="exists" />
>>>>>>
>>>>>>     <util:FileSearch
>>>>>>       Id="SearchForConsensys"
>>>>>>
>>>>>>
>>>>>> Path="[ProgramFilesFolder]Shimmer\ConsensysPRO\Consensys_v1.5.0\Consensys.exe"
>>>>>>       Variable="ConsensysFound"
>>>>>>       Result="exists" />
>>>>>>
>>>>>>     <util:RegistrySearch
>>>>>>       Id="SearchForFTDI"
>>>>>>       Root="HKLM"
>>>>>>       Key="SYSTEM\CurrentControlSet\Enum\FTDIBUS"
>>>>>>       Result="exists"
>>>>>>       Variable="FTDIFound"/>
>>>>>>
>>>>>>     <util:RegistrySearch
>>>>>>       Id="SearchForSparkwave"
>>>>>>       Root="HKCU"
>>>>>>       Key="Software\Spark Neuro\Sparkwave"
>>>>>>       Result="exists"
>>>>>>       Variable="SparkwaveFound"/>
>>>>>>
>>>>>>     <Chain>
>>>>>>       <PackageGroupRef Id="NetFx472Redist"/>
>>>>>>       <ExePackage Id='GazepointControl'
>>>>>> SourceFile="../../ExternalSoftware/Gazepoint_5.3.0.exe" Vital='yes'
>>>>>> PerMachine='yes' InstallCondition='NOT GazepointFound'/>
>>>>>>       <ExePackage Id='Consensys'
>>>>>> SourceFile="../../ExternalSoftware/Setup.exe" Vital='yes'
>>>>>> PerMachine='yes'
>>>>>> InstallCondition='NOT ConsensysFound'/>
>>>>>>       <MsiPackage Id='Sparkwave' SourceFile='Sparkwave.msi'
>>>>>> Vital='yes'
>>>>>> InstallCondition='NOT SparkwaveFound' Visible='yes'
>>>>>> DisplayInternalUI='yes'></MsiPackage>
>>>>>>       <ExePackage Id='SerialPortDriver'
>>>>>> SourceFile="../../ExternalSoftware/CDM21228_Setup.exe" Vital='yes'
>>>>>> PerMachine='yes' InstallCondition='NOT FTDIFound'/>
>>>>>>     </Chain>
>>>>>>   </Bundle>
>>>>>> </Wix>
>>>>>>
>>>>>> ____________________________________________________________________
>>>>>> WiX Toolset Users Mailing List provided by FireGiant
>>>>>> http://www.firegiant.com/
>>>>>>
>>>>>>

More information about the wix-users mailing list