[wix-users] Burn performance

Parkes, Kevin kevin.parkes at wacom.com
Mon Jul 30 09:12:52 PDT 2018


There's nothing in the log between those two lines. It's the Standard BA - what does that do at that point?

-----Original Message-----
From: wix-users <wix-users-bounces at lists.wixtoolset.org> On Behalf Of Bob Arnson via wix-users
Sent: 30 July 2018 17:08
To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
Cc: Bob Arnson <bob at firegiant.com>
Subject: Re: [wix-users] Burn performance

What happens between the "apply complete" and "shutting down" lines? The BA is in charge then.

-----Original Message-----
From: wix-users <wix-users-bounces at lists.wixtoolset.org> On Behalf Of Parkes, Kevin via wix-users
Sent: Monday, 30 July, 2018 11:06
To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
Cc: Parkes, Kevin <kevin.parkes at wacom.com>
Subject: Re: [wix-users] Burn performance

This is fresh install old version  verses fresh install new version. 

Since the "delay" seems to occur after "Apply complete" I would have thought all Windows Installer & exe package operations would have been completed.

-----Original Message-----
From: Hoover, Jacob <Jacob.Hoover at greenheck.com> 
Sent: 30 July 2018 15:38
To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
Cc: Parkes, Kevin <kevin.parkes at wacom.com>
Subject: RE: Burn performance

Is this a difference between an install verses an upgrade? Burn itself doesn't add a lot of time, but it is constrained by Windows Installer and 3rd party exe packages.

-----Original Message-----
From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On Behalf Of Parkes, Kevin via wix-users
Sent: Monday, July 30, 2018 7:37 AM
To: 'wix-users at lists.wixtoolset.org' <wix-users at lists.wixtoolset.org>
Cc: Parkes, Kevin <kevin.parkes at wacom.com>
Subject: [wix-users] Burn performance

A customer has complained that a new version of our (StdBA-based) installer is much slower than the previous version. The previous version was built with WiX v3.11.0, the current one with v3.11.1. The new version does add a (very simple and small) MSI package but, looking at the burn log files, the most obvious/significant delay appears to be between:
  "Apply complete, …"
and
  "Shutting down, …"
The difference in timestamps between the two message is 26sec for the old version vs 67sec for the new one.

Was there any change between v3.11.0 & v3.11.1 that might account for the extra time taken between those two messages?

More to the point, is there anything I can do to reduce or eliminate the delay in the new version?

Thanks



____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/

____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/

____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/


More information about the wix-users mailing list