[wix-users] Unsubscribe

John Quirk john at apajove.com
Tue Nov 28 16:32:45 PST 2017




________________________________
From: wix-users <wix-users-bounces at lists.wixtoolset.org> on behalf of Joel Budreau via wix-users <wix-users at lists.wixtoolset.org>
Sent: Tuesday, November 28, 2017 11:08:56 PM
To: Hoover, Jacob
Cc: Joel Budreau; WiX Toolset Users Mailing List
Subject: Re: [wix-users] Wix Bundle and ARP DisplayVersion

We use our x.y.z.build numbers as: major.minor.hotpatch.build. But our build system is currently spinning out build values over 7,000,000! I had always put this large build number in the 4th ProductVersion field since MSI ignores it anyway. All was well until we started using wix bundles that fall over dead if you use large version values, or even detect large version values as a part of an upgrade of an older MSI! So, now I’m running around chopping off build numbers and trying to find a way for customers and developers to look at a machine and figure out what builds were installed...


- Joel

> On Nov 28, 2017, at 3:01 PM, Hoover, Jacob <Jacob.Hoover at greenheck.com> wrote:
>
> The short answer is... You can't.
>
> The Bundle/@Version attribute is used to populate them both. You could always write a WIP to suggest this, but having the version of the file != what is displayed in ARP would just be confusing, so I doubt it would get much traction.
>
> Is there a reason you can't change your build system to produce valid version numbers?
>
>
> -----Original Message-----
> From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On Behalf Of Joel Budreau via wix-users
> Sent: Tuesday, November 28, 2017 3:51 PM
> To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
> Cc: Joel Budreau <joel.budreau at gmail.com>
> Subject: [wix-users] Wix Bundle and ARP DisplayVersion
>
> I'm trying to figure out how to change the DisplayVersion in the ARP registry for a bundle. Our products have really large build number, so I can't put them into the 4th field of the ProductVersion.
>
> Looking to do something like:
> Bundle Version = 1.2.3
> Bundle DisplayVersion = 1.2.3.456789
>
> I see the DisplayVersion is written by the engine via RegistrationParseFromXml(), but following that up the stack, I don't know how (or where) to author the manifest/xml file to populate that data.
> Any tips?
>
> Thanks,
> Joel
>
> ____________________________________________________________________
> WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/


____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/

This message is intended solely for the use of the individual or organisation to whom it is addressed. It may contain privileged or confidential information.

If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message.

Apajove Limited

Microsoft Solutions Provider

17 St Ann's Square, Manchester, M2 7PW
Registered in England, Company Number 7728656
VAT Number 118385308


More information about the wix-users mailing list