[wix-users] 0x80070483 error with Burn

Farrukh Waheed farrukh1 at gmail.com
Sun Apr 23 23:23:03 PDT 2017


following are my two exe packages and working fine:

 <ExePackage DisplayName="Microsoft DirectX June 2010"
 Description="Microsoft DirectX June 2010 package"
Cache="no"                  Compressed="yes"
         PerMachine="yes"                  Permanent="yes"
     Vital="yes"
SourceFile="$(var.PreReqDir)Microsoft\DirectX\2010\DirectX_June_2010.exe"
                 InstallCondition="VersionNT=v6.1"                   >
     </ExePackage>

<ExePackage DisplayName="Microsoft Windows Update KB2670838"
       Description="Microsoft Windows Update KB2670838"
   Cache="no"                  Compressed="yes"
InstallCommand="/VerySilent"
PerMachine="yes"                  Permanent="yes"
Vital="yes"
SourceFile="$(var.PreReqDir)Microsoft\Windows\Updates_Patches\Windows6.1-KB2670838-x64.exe"
                 InstallCondition="VersionNT=v6.1 AND VersionNT64"
              >      </ExePackage>


On 24 April 2017 at 11:20, Farrukh Waheed <farrukh1 at gmail.com> wrote:

> try removing /ChainingPackage "QBFC12_0Installer.exe" from
> command line.
>
> On 21 April 2017 at 23:05, Nir Bar <nir.bar at panel-sw.com> wrote:
>
>> Maybe you're missing a payload?
>>
>> Sent from my ASUS
>>
>> -------- Original Message --------
>> From:"Douglas, Keith (STATCAN)" <keith.douglas at canada.ca>
>> Sent:Fri, 21 Apr 2017 18:36:26 +0300
>> To:WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
>> Subject:Re: [wix-users] 0x80070483 error with Burn
>>
>> >I saw some stuff which suggested that the first 0x483 is "file not
>> found" from InstallShield stuff.
>> >
>> >
>> >Keith Douglas
>> >
>> >Programmer Analyst, Information Technology Operations Divison
>> >Statistics Canada / Government of Canada
>> >keith.douglas at canada.ca / 613-854-5589
>> >
>> >Programmeur Analyste, Division des opérations des technologies de
>> l'information
>> >Statistiques Canada / Gouvernement du Canada
>> >keith.douglas at canada.ca / 613-854-5589
>> >
>> >-----Original Message-----
>> >From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On
>> Behalf Of Steve De George
>> >Sent: April-21-17 10:48 AM
>> >To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
>> >Subject: Re: [wix-users] 0x80070483 error with Burn
>> >
>> >
>> >The install fails.
>> >
>> >I did find an issue with the actual file name I was using but after
>> fixing that nothing changes.
>> >
>> >
>> >I can find nothing by Googling the error code.
>> >
>> >
>> >New Burn log.
>> >
>> >--------------------------------------------------------------------
>> >
>> >[0A54:1110][2017-04-21T07:31:22]i305: Verified acquired payload:
>> Qb12SdkRedist at path: C:\ProgramData\Package Cache\.unverified\Qb12SdkRedist,
>> moving to: C:\ProgramData\Package Cache\939254A5234346E7723C77ED
>> 4E80E72BB40801D2\redist\QBFC12_0Installer.exe.
>> >[0A54:0DDC][2017-04-21T07:31:22]i301: Applying execute package:
>> Qb12SdkRedist, action: Install, path: C:\ProgramData\Package
>> Cache\939254A5234346E7723C77ED4E80E72BB40801D2\redist\QBFC12_0Installer.exe,
>> arguments: '"C:\ProgramData\Package Cache\939254A5234346E7723C77ED
>> 4E80E72BB40801D2\redist\QBFC12_0Installer.exe" /S /v/qn /norestart
>> /ChainingPackage "QBFC12_0Installer.exe" /log "QbSdkFullLog.html"'
>> >[0A54:0DDC][2017-04-21T07:31:25]e000: Error 0x80070483: Process
>> returned error: 0x483
>> >[0A54:0DDC][2017-04-21T07:31:25]e000: Error 0x80070483: Failed to
>> execute EXE package.
>> >[0720:1424][2017-04-21T07:31:25]e000: Error 0x80070483: Failed to
>> configure per-machine EXE package.
>> >[0720:1424][2017-04-21T07:31:25]i319: Applied execute package:
>> Qb12SdkRedist, result: 0x80070483, restart: None
>> >[0720:1424][2017-04-21T07:31:25]e000: Error 0x80070483: Failed to
>> execute EXE package.
>> >
>> >
>> >
>> >Steve De George - Pivotal Z / NextGen Software, Inc.
>> >253-656-4061 <(253)%20656-4061>
>> >www.pivotalz.com<http://www.pivotalz.com/>
>> >www.nextgensoftware.com<http://www.nextgensoftware.com/>
>> >________________________________
>> >From: wix-users <wix-users-bounces at lists.wixtoolset.org> on behalf of
>> Nir Bar <nir.bar at panel-sw.com>
>> >Sent: Friday, April 21, 2017 7:37:14 AM
>> >To: WiX Toolset Users Mailing List
>> >Subject: Re: [wix-users] 0x80070483 error with Burn
>> >
>> >Can't argue with that.
>> >At times you get the error, does it actually fail to install QuickBooks?
>> If it installs successfully, you can add an ExitCode element to translate
>> the code to success.
>> >
>> >Sent from my ASUS
>> >
>> >-------- Original Message --------
>> >From:Steve De George <stevedegeorge at pivotalz.com>
>> >Sent:Fri, 21 Apr 2017 17:02:45 +0300
>> >To:WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
>> >Subject:Re: [wix-users] 0x80070483 error with Burn
>> >
>> >>
>> >>Thanks for the reply.
>> >>
>> >>
>> >>I got the flags from running the EXE directly with /? and it showed
>> them in help screen and that says 'QBFC 12 - InstallShield Wizard'
>> >>
>> >>
>> >>Also to I can run it directly from the command line with those flags
>> and it works.
>> >>
>> >>
>> >>Steve De George - Pivotal Z / NextGen Software, Inc.
>> >>253-656-4061
>> >>www.pivotalz.com<http://www.pivotalz.com/>
>> >>www.nextgensoftware.com<http://www.nextgensoftware.com/<ht
>> tp://www.nextgensoftware.com<http://www.nextgensoftware.com/>>
>> >>________________________________
>> >>From: wix-users <wix-users-bounces at lists.wixtoolset.org> on behalf of
>> Nir Bar <nir.bar at panel-sw.com>
>> >>Sent: Friday, April 21, 2017 4:51:40 AM
>> >>To: WiX Toolset Users Mailing List
>> >>Subject: Re: [wix-users] 0x80070483 error with Burn
>> >>
>> >>The command line flags you supply for InstallCommand are not supported
>> by InstallShield (did you copy from .NET installation?)
>> >>
>> >>If the QuickBooks InstallShield is a Basic MSI project (if there's a
>> way to know that), try changing to '/S /v/qn'.
>> >>Otherwise, if it is an InstallScript or InstallScript MSI project,
>> generate a response file and add it as 'Setup.iss' payload to the
>> ExePackage and change command line to '/s'
>> >>
>> >>Nir Bar
>> >>Panel::Software Architecture and Development
>> >>
>> >>______________________________________________________________
>> >>JetBA.net- WPF BootstrapperApplication Library
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>____________________________________________________________________
>> >>WiX Toolset Users Mailing List provided by FireGiant
>> http://www.firegiant.com/
>> >>
>> >>____________________________________________________________________
>> >>WiX Toolset Users Mailing List provided by FireGiant
>> http://www.firegiant.com/
>> >
>> >____________________________________________________________________
>> >WiX Toolset Users Mailing List provided by FireGiant
>> http://www.firegiant.com/
>> >
>> >____________________________________________________________________
>> >WiX Toolset Users Mailing List provided by FireGiant
>> http://www.firegiant.com/
>> >
>> >____________________________________________________________________
>> >WiX Toolset Users Mailing List provided by FireGiant
>> http://www.firegiant.com/
>>
>> ____________________________________________________________________
>> WiX Toolset Users Mailing List provided by FireGiant
>> http://www.firegiant.com/
>>
>
>


More information about the wix-users mailing list