[wix-users] Log Level within Bootstrapper Application?
John Cooper
JoCooper at jackhenry.com
Wed Sep 21 06:09:23 PDT 2016
I call my bundle from the command line all the time. If I want a different verbosity, I set my variable to that level on the command line.
--
John Merryweather Cooper
Senior Software Engineer -- Integration Development Group -- Enterprise Notification Service
Jack Henry & Associates, Inc.® | Lenexa, KS 66214 | Office: 913-341-3434x431050
JoCooper at jackhenry.com
-----Original Message-----
From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On Behalf Of Reuss, Matthias
Sent: Wednesday, September 21, 2016 7:30 AM
To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
Subject: Re: [wix-users] Log Level within Bootstrapper Application?
The e-mail below is from an external source. Please do not open attachments or click links from an unknown or suspicious origin.
Hi John,
So you do not call your bootstrapper at the command line (with possibly some LogLevel value)?
Best regards
Matthias Reuss
-----Ursprüngliche Nachricht-----
Von: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] Im Auftrag von John Cooper
Gesendet: Dienstag, 20. September 2016 15:15
An: WiX Toolset Users Mailing List
Betreff: Re: [wix-users] Log Level within Bootstrapper Application?
I use a string variable and TryParse it internally to an appropriate value. Works fine.
--
John Merryweather Cooper
Senior Software Engineer -- Integration Development Group -- Enterprise Notification Service Jack Henry & Associates, Inc.® | Lenexa, KS 66214 | Office: 913-341-3434x431050 JoCooper at jackhenry.com
-----Original Message-----
From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On Behalf Of Reuss, Matthias
Sent: Tuesday, September 20, 2016 6:29 AM
To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
Subject: [wix-users] Log Level within Bootstrapper Application?
The e-mail below is from an external source. Please do not open attachments or click links from an unknown or suspicious origin.
Hi there,
The Engine.Log method takes a LogLevel parameter.
Where is this LogLevel evaluated?
E.g. can the user give a command-line switch to get a more verbose log?
Best regards
Matthias Reuss
____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/
NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information.
Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies.
____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/
____________________________________________________________________
WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/
NOTICE: This electronic mail message and any files transmitted with it are intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may contain confidential and/or privileged information.
Any unauthorized review, use, printing, saving, copying, disclosure or distribution
is strictly prohibited. If you have received this message in error, please
immediately advise the sender by reply email and delete all copies.
More information about the wix-users
mailing list