[wix-users] FW: Bundle: after reboot extracted payload is not detected

Carter Young ecyoung at grandecom.net
Thu Oct 29 12:55:22 PDT 2015


  * Disable Parallel Caching(If enabled). 
    See:http://wixtoolset.org/documentation/manual/v3/xsd/wix/chain.html

  * Reorganize your bundle chain if needed, Install your prerequisite
    packages in the proper order and use PrereqSupportPackage="Yes" to
    enforce this. See:
    http://wixtoolset.org/documentation/manual/v3/xsd/wix/msipackage.html

  * Set a  proper NAME Element for each of your package elements so that
    none of them are extracted to the default, which is AppData. See
    again
    http://wixtoolset.org/documentation/manual/v3/xsd/wix/msipackage.html 
    Setting a Name Element with a Proper Directory String will override
    the default behavior.
  * The last package in your chain should be mysetup.msi

Between the 3rd and 4th Bullet you can Reboot the machine, and once
restarted, restart setup at Bullet 4, or you can install all 4 Bullets
and restart

Carter



On 10/27/2015 06:40 AM, Christoph Welte wrote:
> Hello
> Thanks... but I have no idea what to do to fix this issue
> /Christoph
>
> -----Original Message-----
> From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On Behalf Of Rob Mensching
> Sent: Montag, 26. Oktober 2015 20:36
> To: WiX Toolset Users Mailing List <wix-users at lists.wixtoolset.org>
> Subject: Re: [wix-users] FW: Bundle: after reboot extracted payload is not detected
>
> Burn caches packages so the TEMP can be removed at restart. If you are doing ParallelCache ensure caching completes before restart is executed.
>
> _____________________________________________________________
>  Short replies here. Complete answers over there: http://www.firegiant.com/
>
> -----Original Message-----
> From: wix-users [mailto:wix-users-bounces at lists.wixtoolset.org] On Behalf Of Carter Young
> Sent: Monday, October 26, 2015 12:31 PM
> To: wix-users at lists.wixtoolset.org
> Subject: Re: [wix-users] FW: Bundle: after reboot extracted payload is not detected
>
> I believe everything in AppData/Local/Temp etc is cleaned out upon reboot.  Try setting the Bundle/msi to extract the payload somewhere more permanent.  NVIDIA's Driver installer does this to prevent the behavior you describe.  All Files are extracted before the msi even runs to C:\NVIDIA\WHQL\DriverVersionNumber\blah blah, in case a user like me requires a restart when doing a clean install of new drivers.  When my machine reboots, a key gets added to HKLM\Windows\... RunOnce, and the installer finishes/cleans up...
>
> Carter
>
> On 10/26/2015 10:57 AM, Christoph Welte wrote:
>> A bundle "mysetup.exe" contains as first chain element  .net framework setup and in addition a msi mysetup.msi.
>> E.g. mysetup.exe is located in c:\temp. The MSI is extracted to e.g. C:\Users\XX\AppData\Local\Temp\{1653b848-bf45-4e06-bc1f-e41334fb1aa4}\.be\ mysetup.msi.
>> After installation of .net and a reboot the extracted payload is not detected, the MSI is searched in "c:\temp" instead of C:\Users\XX\AppData\Local\Temp\{1653b848-bf45-4e06-bc1f-e41334fb1aa4}\.be\ mysetup.msi.
>>
>> If setup is executed without a reboot (that means .net already installed) everything works fine.  Also if setup is restarted manually after a reboot.
>>
>> Any idea or help?
>> Thanks Christoph
>>
>> ____________________________________________________________________
>> WiX Toolset Users Mailing List provided by FireGiant 
>> http://www.firegiant.com/
>>
>>
>>
>
>
> ____________________________________________________________________
> WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/
>
> ____________________________________________________________________
> WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/
>
> ____________________________________________________________________
> WiX Toolset Users Mailing List provided by FireGiant http://www.firegiant.com/
>
>
>




More information about the wix-users mailing list