[wix-devs] 4822 - Delay ARP registration in Bundles until a non-permanent package is installed

Wed Jul 22 14:35:44 PDT 2020

3. Deprecate MBA, use .NET 5 with Sean's DncHost work, declare victory.

-----Original Message-----
From: wix-devs <wix-devs-bounces at lists.wixtoolset.org> On Behalf Of Rob Mensching via wix-devs
Sent: Wednesday, 22 July, 2020 17:04
To: WiX Toolset Developer Mailing List <wix-devs at lists.wixtoolset.org>
Cc: Rob Mensching <rob at firegiant.com>
Subject: Re: [wix-devs] 4822 - Delay ARP registration in Bundles until a non-permanent package is installed

> The scenario that you've been focusing on - user cancels after 
> installing NETFX caused a reboot - is a separate issue to me

Ahh, okay. Yes. That is the disconnect. I took issue #4822 to represent the problem called out in the linked thread and the duplicated bug #4905. I didn't consider the issue's title much because it was written by someone that didn't really understand how Burn works. Perhaps we should fix the issues title? #4905 was pretty on the nose.

> only exists because we've deemed 4822 impossible.

That's a strong statement. I thought we were throwing around ideas here to try to come up with a solution to #4822?

> > I just don't know that having an explicit PrereqChain really buys us
anything.
>
> I gave a potential reason. I guess you didn't think it was valid.

I do think "InProgressRegistrationName" is a cool feature and it would better represent interrupted installations (and I don't think it needs to be tied to pre-reqs but I can see the argument either way). However, I am concerned about resolving #4822 with "InProgressRegistrationName" because when the user cancels an installation after the mbapreq is complete then the InProgressRegistrationName would be what is left in ARP.

Some fundamentals:

1. ARP entry is created early in execution so there is a place to "continue or undo" an interrupted (partially completed) installation 2. Post-forcerestart (including mbapreq restart), bundle should resume automatically post-restart 3. Bundle is cached in secure cache so RunOnce can safely resume it elevated 4. Since mbapreq "partially completes" successfully the cached bundle and ARP entry remain present even if the user cancels or the install fails and rolls back

I think we've covered the bases and there are two options:

1. BA's that use mbapreq need to plan and execute an uninstall if the bundle does not execute an install successfully 2. Burn "knows" when it is running post mbapreq/post-restart and cleans up the cached bundle and ARP entry as the bundle exits if the bundle does not execute an install successfully

Have I missed anything? Are there other solutions..?

-----Original Message-----
From: wix-devs <wix-devs-bounces at lists.wixtoolset.org> On Behalf Of Sean Hall via wix-devs
Sent: Friday, July 17, 2020 9:52 PM
To: WiX Toolset Developer Mailing List <wix-devs at lists.wixtoolset.org>
Cc: Sean Hall <r.sean.hall at gmail.com>
Subject: Re: [wix-devs] 4822 - Delay ARP registration in Bundles until a non-permanent package is installed

> Is there a design that avoids losing the battle?

In general, no. The second option I proposed in the WIP (to skip writing the ARP entry and rely on the RunOnce key) relied on assuming that the bundle could finish executing when run from the RunOnce key. We all agreed that we couldn't make that assumption.

I think we're actually discussing multiple issues here. For me, 4822 is explicitly about the fact that the Burn engine is writing an ARP entry in the scenario described in the WIP. We've already agreed that it must be written. So we've already agreed that implementing this issue is impossible. So for me, the InProgressRegistrationName is our mitigation for
4822 - instead of writing "the" ARP entry we are writing a "pre-req" ARP entry.

The scenario that you've been focusing on - user cancels after installing NETFX caused a reboot - is a separate issue to me that only exists because we've deemed 4822 impossible. It may be a common scenario, but it's also pretty much the only scenario where the BA can actually do the right thing without help from the engine. Like I've said, I completely agree we should try to address this scenario.

The other issue is that the Burn engine needs to adjust its plan such that the bundle isn't cached or registered in ARP at the end of execution if no non-permanent packages are present on the machine at the end of execution.

>  What do you mean exactly by clean-up?

Removing the ARP entry and cached bundle when there are no non-permanent packages present on the machine.

> I just don't know that having an explicit PrereqChain really buys us
anything.

I gave a potential reason. I guess you didn't think it was valid.

On Sat, Jul 18, 2020 at 8:42 AM Rob Mensching <rob at firegiant.com> wrote:

> > To me, the battle was already lost in (2) of your scenario where the
> bundle gets registered.
>
> Is there a design that avoids losing the battle (without leaving the 
> bundle in a location that won't get cleaned up)? Fundamentally the 
> scenario
> is:
>
> 1. BA requires .NETFX
> 2. Burn uses mbapreq to install .NETFX 3. NETFX requires restart, user 
> restarts 4. After restart, Burn starts up BA's managed code 5. User 
> cancels BA without starting install 6. Nothing but NETFX is left on 
> the machine as a result of Burn
>
>
> > Is there a reason that the engine needs the command line parameter 
> > to
> clean up after Quit? I think it should always try to clean up, and 
> maybe we need to add a parameter to Quit to opt out of that.
>
> I don't quite follow. What do you mean exactly by clean-up?
>
>
> > Now that you say it, I think we have been designing a "pre-req" 
> > section
> of the chain.
>
> Yep. I just don't know that having an explicit PrereqChain really buys 
> us anything.
>
>
> -----Original Message-----
> From: wix-devs <wix-devs-bounces at lists.wixtoolset.org> On Behalf Of 
> Sean Hall via wix-devs
> Sent: Wednesday, July 15, 2020 7:30 PM
> To: WiX Toolset Developer Mailing List <wix-devs at lists.wixtoolset.org>
> Cc: Sean Hall <r.sean.hall at gmail.com>
> Subject: Re: [wix-devs] 4822 - Delay ARP registration in Bundles until 
> a non-permanent package is installed
>
> To me, the battle was already lost in (2) of your scenario where the 
> bundle gets registered. The user is going to see an ARP entry that 
> they don't expect. That's why I'm much less concerned about the BA not 
> cleaning up, it's the engine's fault of registering in the first 
> place. I'm not against trying to help the BA clean up the bundle, I 
> just think making that unexpected ARP entry less confusing is much more important.
>
> Is there a reason that the engine needs the command line parameter to 
> clean up after Quit? I think it should always try to clean up, and 
> maybe we need to add a parameter to Quit to opt out of that.
>
> Now that you say it, I think we have been designing a "pre-req" 
> section of the chain. The only reason I can see to make it explicit 
> would be if somebody really wanted a permanent package to be 
> considered part of the "real" part of the bundle. I can't see us 
> allowing non-permanent packages in the "pre-req" section of the chain.
> If there were a PrereqChain element, it would make more sense for the 
> "InProgressRegistrationName" attribute to be specified there.
>
> On Thu, Jul 16, 2020 at 3:59 AM Rob Mensching <rob at firegiant.com> wrote:
>
> > > The reason I want "until first non-permanent package" is that it 
> > > seems
> > to be the best way to describe when a "real" part of the bundle has 
> > been installed. If the bundle is uninstalling and it fails before 
> > all non-permanent packages are uninstalled, then I don't think the 
> > "InProgressRegistrationName" should ever be written to ARP during 
> > that Apply execution.
> >
> > Yeah. Seems reasonable. We're really getting to a point of having a 
> > "pre-req" section of the chain in Burn. I'm not sure it's worth 
> > explicitly specifying in the .wxs but maybe the BurnBackend should 
> > automatically tag early permanent packages as "pre-reqs" to help the 
> > engine? I don't know just ideas.
> >
> > > Points 1 and 2 in the WIP should ensure that if the BA does
> > Detect/Plan/Apply then the engine does the right thing. So the only 
> > problem is if the BA doesn't successfully start Apply. That means 
> > that any functionality we add would have to happen when they call 
> > the engine's Quit method, and it probably would need a new command 
> > line parameter since we shouldn't rely on the BA calling Detect.
> > That should be possible to implement but might be tricky since the 
> > BA has effectively shutdown and wouldn't be expecting any more messages.
> >
> > Yes. This is exactly what I was pointing out and I 100% agree with 
> > everything you said. It isn't that hard to get into this situation:
> >
> > 1. Launch bundle that requires NETFX installed and restarted 2.
> > Install NETFX, bundle will be registered, restart 3. Resume 
> > installation, bundle shows its install UI for first time 4. User 
> > cancels without proceeding through the install UI 5. The bundle is 
> > still registered but the user thinks they "cancelled the install"
> > before even clicking the Install button (they only accepted the 
> > "NETFX install", not the "product's install")
> >
> > The work around *is* easy, uninstall the "leftover" product. The 
> > problem is the perception of the user that thinks the product never 
> > should have been there (installing NETFX isn't installing the 
> > product). I agree the only solution I've seen is for Burn to clean 
> > up the cached bundle and registration during Quit() without talking 
> > to the
> BA.
> >
> > My primary concern remains that the "InProgressRegistrationName"
> > solution does not address this most problematic scenario.
> >
> >
____________________________________________________________________
WiX Toolset Developer Mailing List provided by FireGiant http://www.firegiant.com/